我們都知道由于濟南電纜橋架生產廠家生產的一種鍍鋅工藝的電纜橋架通過整體化鍍鋅技術處理后，可以有效的耐腐蝕，產品含有鍍鋅層一種電纜線橋架，鋅這類金屬導電性能優良。在濟南的工程建設當中有很好的效果。

　　We all know that a kind of galvanized cable tray produced by the cable tray manufacturer in Jinan can effectively resist corrosion after being treated with integrated galvanizing technology. The product contains a kind of cable bridge with galvanized layer, and zinc has excellent electrical conductivity. The engineering construction in Jinan has achieved good results.

　　鍍鋅技術性分成冷鍍鋅和熱鍍鋅，二節鍍鋅橋架間的聯接連接片應用緊固螺絲固定不動后，能夠確保電流量從橋架連接片順利完成，所以不用根據協助接地線來協助電流通過。針對靜電噴塑橋架就需要跨電線接頭由于表層靜電噴塑層導電，因此二節靜電噴塑橋架中間連接時需要跨電線接頭和爪墊來協助電流通過。

　　Galvanizing technology is divided into cold galvanizing and hot galvanizing. The connecting pieces between the two galvanized bridge sections should be fixed with fastening screws to ensure the smooth completion of the current flow from the bridge connecting piece, so there is no need to assist the grounding wire to assist the current flow. For electrostatic spray molded cable trays, it is necessary to cross wire connectors. Due to the conductivity of the surface electrostatic spray molded layer, the intermediate connection between the two sections of the electrostatic spray molded cable tray requires cross wire connectors and claw pads to assist in the passage of current.

　　2013國家行業標準明確了鍍鋅橋架的防火等級以及編號，防火等級代號為NII，保持上班時間高于或等于45min。鋪設變頻電纜的多層鍍鋅橋架間的距離不可以低于200mm，鋪設10kv以下的電線電纜(除高密度聚乙烯絕緣電線外)的多層鍍鋅橋架間的距離不可以低于250mm。

　　The 2013 national industry standard specifies the fire protection rating and number of galvanized cable trays, with the fire protection rating code NII and a minimum of 45 minutes of working hours. The distance between multi-layer galvanized cable trays for laying frequency conversion cables shall not be less than 200mm, and the distance between multi-layer galvanized cable trays for laying wires and cables below 10kV (except for high-density polyethylene insulated wires) shall not be less than 250mm.

　　熱鍍鋅在鋅溶液中添加少量鎳，可以有效的抑止含硅鎮靜鋼的圣德林效用，是當前生活實踐中運用較普遍存在的中間合金添加物。熱鍍鋅可以使全部建筑鋼材基材表層都受到了鋅層維護，不論是凹處管材內部結構，或者其它無法物理學進到小角落，融化的鋅都可以輕而易舉地勻稱遮蓋上。

　　Adding a small amount of nickel to the zinc solution for hot dip galvanizing can effectively suppress the Saint Germain effect of silicon containing killed steel, and is a commonly used intermediate alloy additive in current life practice. Hot dip galvanizing can ensure that the surface of all building steel substrates is maintained by a zinc layer. Whether it is the internal structure of concave pipes or other small corners that cannot be physically penetrated, the melted zinc can be easily and evenly covered.

　　總的來說，濟南電纜橋架生產廠家目前的鍍鋅工藝是非?？茖W的，可以有效的提升電纜橋架的質量，如果你也想了解的話歡迎前來咨詢考察。

相關文章：濟南電纜橋架生產廠家